Home / CNC milling automation
CNC milling automation: let a robot load your milling machine

CNC milling automation: let a robot load your milling machine

A robot loads raw parts into the vice or fixture, unloads the finished parts and starts the next cycle, so your milling machine keeps running at night and over the weekend.

What is CNC milling automation?

CNC milling automation, or mill automation, means a robot takes over the loading and unloading of your milling machine or machining centre. It picks a raw part, places it in the vice or fixture, starts the program and removes the finished part. Milling itself stays exactly as it is. RoboJob has automated milling machines since 2012, when the first Mill-Assist was launched.

Milling cycles are often long. A complex part can easily take 30 minutes or more, so an operator either waits next to the machine or the machine waits for the operator. A robot removes that waiting time and runs series during breaks, between shifts and through the night, so the machine is free during the day for one-off parts.

There are two ways to automate a milling machine. The robot loads individual parts into an automatic vice, or it exchanges complete fixture pallets on the zero point clamping system. RoboJob offers both.

Why machine shops automate their milling machines
  • Shortage of skilled operators: one operator supervises several machining centres instead of feeding one.
  • Long cycle times: nobody has to come back every half hour to change a part.
  • More spindle hours: evening, night and weekend shifts run unattended on the machines you already own.
  • Free capacity for one-off parts: series run at night, so the machine is available during the day.
  • Better jobs: operators move from loading to programming, set-up and quality control.

Which milling machines can a robot load?

Before a robot can load your machining centre, it needs a robot interface for the signals between machine and robot, an automatic door, and workholding that clamps automatically, such as a pneumatic vice or a zero point clamping system. If something is missing, your machine supplier or RoboJob adds it, also on older machines.

3-axis vertical machining centres

The robot loads parts into a vice or fixture and can flip them for the second side. Examples are the Haas VF, Hurco VMX, Mazak VCN and Hedelius Acura. Typical solutions: Mill-Assist, Coby CNC, Tower and Wall.

5-axis machining centres

5-axis machining centres such as the Mazak CV5-500 can be automated too, by loading parts into the vice or by exchanging fixture pallets.

Horizontal machining centres

Horizontal machining centres, such as the Mazak HCN, Okuma MA-H and MB-H, DMG MORI NHX and DN Solutions NHP series, can be automated too. The robot loads workpieces or fixtures. Typical solutions: Mill-Assist, Pallet-Load, Tower and Wall.

Every milling machine brand

RoboJob automates milling machines from Haas, Mazak, DMG MORI, Hurco, Hedelius, Brother, Okuma, DN Solutions, Fanuc, Kitamura, Quaser and many more.

Lathes in the same shop?

Tower and Wall can tend milling machines and lathes with one system, also of different brands. Read how a robot loads your lathes, or see the overview of CNC machine tending.

Which RoboJob system fits your milling machine?

The right system depends on your part weight, batch sizes and how long the machine should run unattended.

  • Mill-Assist: the specialist for CNC milling machines with frequent job changes. 12, 25, 35 or 70 kg robot, workpieces from 6 to 42 kg. Two exchangeable grippers; Essential Mini or Essential table in an integrated, semi-integrated or separated layout. Installed in 4 to 5 days.
  • Tower: for high-mix production and long unattended runs, on up to two machines. 35 or 165 kg robot, workpieces up to 24 or 113 kg. Up to 14 m² of storage in adjustable trays, for parts, fixtures and tools.
  • Pallet-Load: for heavy or large parts in larger batches. 35 or 165 kg robot, workpieces up to 24 or 113 kg. Raw parts on a positioning pallet, finished parts back on the pallet or on a wooden pallet.
  • Wall: for several machines, each with its own robot, from one central storage. 35 or 165 kg robot, workpieces up to 24 or 113 kg.
  • Coby CNC: a cobot for small, light parts up to 4 kg and small batches. No fencing or scanners needed, and it moves between machines.
How heavy can your parts be?

Mill-Assist loads parts from 6 to 42 kg, depending on the robot size. For heavier parts or complete fixture pallets, Tower, Wall and Pallet-Load go up to 113 kg on the standard systems. These are net weights, with the weight of the gripper already subtracted.

Mill-Assist or Tower?

Choose Mill-Assist when you want to automate a single milling machine with a compact, open cell and fast job changes. Choose Tower when you need large storage for long unattended runs, many different jobs and fixtures, or one system for two machines.

Explore our milling automation systems

  • Mill-Assist

    Mill-Assist

    Eine kompakte, vielseitige Lösung, die das Beladen von CNC-Fräsmaschinen mit Geschwindigkeit und Präzision automatisiert.

  • Tower

    Tower

    Tower: die ultimative Automatisierung für Dreh- und Fräsmaschinen - wechselt Vorrichtungen, Spannbacken, Spannzangen und Werkstücke schneller, als Sie "Automatisierungsgenie" sagen können.

  • Pallet-Load

    Pallet-Load

    Eine zuverlässige Automatisierungslösung für das effiziente Be- und Entladen von CNC-Maschinen von und auf eine Palette.

  • Wall

    Wall

    Ein revolutionäres modulares Automatisierungssystem, das die Beladung von CNC-Maschinen bei maximaler Raumeffizienz vereinfacht.

  • Coby CNC

    Coby CNC

    Der kompakte, auf Sicherheit bedachte Mitarbeiter, der Ihren ersten Schritt in die CNC-Automatisierung wie einen Spaziergang erscheinen lässt.

Exchange complete fixture pallets

Exchange complete fixture pallets

Besides loading parts into the vice, the robot can load complete fixture pallets onto the zero point clamping system of your machine.

Fixtures, second operations and pallets

Fixture pallets

Instead of loose parts, the robot can also load fixture pallets onto the zero point clamping system, so different jobs run one after another.

Flip-over Unit

The flip-over unit turns the part, so the robot can clamp it again for machining the second side. Both operations run without an operator.

Pallet-Load and Pallet-Unload

Heavy raw parts come straight from a positioning pallet, and milled parts are stacked on a standard wooden Euro pallet. Nobody has to lift parts at the machine, and the machine can run longer without an operator.

What does CNC milling automation deliver?

The return on milling automation comes from extra spindle hours on machines you already own. Every hour the machine mills unattended is capacity you did not have to buy or staff.

A simple example: a machining centre that runs one 8-hour shift, 5 days a week, cuts about 40 hours a week. If a robot keeps it running for 8 more hours each evening and night, that becomes 80 hours: twice the output from the same machine. With long cycle times, a full load of parts can keep the machine busy for a whole night.

What changes in your shop

What changes in your shop

Automating a milling machine changes more than the number of spindle hours. It changes how your team works and how you plan production.

More spindle hours. The machine keeps milling during breaks, in the evening and at night. EFM Präzisionstechnik gets 50% more spindle hours on its automated Haas machines.

Operators do more valuable work. One operator supervises several machining centres and spends time on programming, set-up and quality control instead of loading parts.

Small series become profitable. A new job is set up in about 5 minutes. SMB Feldner runs series of 5 to 10 parts at night and accepts orders it used to turn down.

Existing machines qualify. Friedrich Daniels retrofitted an existing Hurco VMX30i with an automatic door and robot interface, and automated it with a Mill-Assist.

You know your payback upfront. The RoboJob ROI calculation shows the payback time for your own machines, wages and shifts.

CNC milling automation in practice

EFM Präzisionstechnik, Germany: 50% more spindle hours

EFM Präzisionstechnik automates three Haas VF milling machines with Mill-Assist Essential cells. The automated machines run 50% more spindle hours, installation was fast and the cells change quickly between products.

SMB Feldner, Germany: more than six extra spindle hours a day with a cobot

Five-person special machine builder SMB Feldner tends its POSMill C 800 KOMPAKT with a Coby CNC since 2022. The cobot runs small series of 5 to 10 parts at night and at weekends, adding more than six spindle hours a day. The investment was in the black from the first month.

Friedrich Daniels, Germany: an existing Hurco automated

Surgical instrument maker Friedrich Daniels automated an existing Hurco VMX30i with a Mill-Assist Essential, after retrofitting an automatic door and robot interface. One machine always keeps running, which means less stress on the shop floor and more time for set-up and process improvement.

More customer stories

More than 2,000 robots in over 30 countries keep CNC machines running. Discover how other machine shops automated their milling machines.

More customer stories

More than 2,000 robots in over 30 countries keep CNC machines running. Discover how other machine shops automated their milling machines.

CNC milling automation: frequently asked questions

What is CNC milling automation?

CNC milling automation means a robot loads raw parts into the vice or fixture of a milling machine or machining centre, unloads the finished parts and starts the next cycle. The result is an automated CNC milling machine that keeps running without an operator, including at night and over the weekend.

Can I automate my existing milling machine?

Yes, also older machines. Friedrich Daniels retrofitted an existing Hurco VMX30i with an automatic door and a robot interface, and now loads it with a Mill-Assist. The machine also needs a vice or fixture that clamps automatically. Your machine supplier or RoboJob adds whatever is missing.

Can a robot also exchange fixtures or pallets in my machining centre?

Yes. With the Fixture Exchange module, the robot loads complete fixture pallets onto the zero point clamping system of the machine, empty or with a workpiece already clamped. The module is available on Mill-Assist, Tower and Wall.

Is milling automation worth it for small series?

Yes, if set-up is fast. On RoboJob systems a new job is set up in about 5 minutes on a touchscreen, without robot programming. SMB Feldner runs series of 5 to 10 parts unattended at night.

Can I automate a 5-axis machining centre?

Yes. The robot loads parts into the vice of a 5-axis machine, or exchanges fixture pallets with Fixture Exchange. Boers & Co and Kammerer MedTec automate Mazak CV5-500 machines with RoboJob.

How heavy can the parts be?

Mill-Assist loads parts from 6 to 42 kg, depending on the robot size. Heavier parts and fixture pallets, up to 113 kg on the standard systems, go on a Tower, Wall or Pallet-Load. Coby CNC handles small parts up to 4 kg. Larger robots are possible on request.

How long does installation take?

A Mill-Assist is installed in 4 to 5 days, as are Pallet-Load and Coby CNC. A Tower or Wall, which often serves more than one machine and also stores fixtures and tools, takes at least 2 weeks.

Which milling machine brands can RoboJob automate?

RoboJob automates milling machines from Haas, Mazak, DMG MORI, Hurco, Hedelius, Brother, Okuma, DN Solutions, Fanuc, Kitamura, Quaser and many other brands, new or existing.

Ready to automate your milling machine?

Ready to automate your milling machine?

Send us a drawing of your parts and the type of milling machine. Our application engineers propose the right cell and send you an offer.

Let's meet

Want to know which system fits your milling machine?

Get in touch and explore the opportunities for your business.

Jan Van De Wouwer Jan Van De Wouwer

Jan Van De Wouwer

Sales Manager
Austin Davis Austin Davis

Austin Davis

Area Sales Manager
Nathan Miliante Nathan Miliante

Nathan Miliante

Area Sales Manager