
Automating existing CNC machines
More capacity without a new machine. RoboJob retrofits your current lathe or milling machine and automates it with a robot.
Can you automate an existing CNC machine?
Yes. Most CNC lathes and milling machines in your shop can be loaded by a robot, also when they were never prepared for automation. RoboJob prepares the machine (the retrofit) and delivers the automation, so your current machines run longer without an extra machine, extra floor space or extra operators.
RoboJob has automated more than 2,000 CNC machines, of every major brand, new and old.
- More spindle hours: your machine keeps running in the evening, at night and at the weekend.
- A clear investment: no extra machine, no extra floor space, no extra operators.
- Fully taken care of: RoboJob prepares the machine and supplies the automation. One partner, from analysis to start-up.
- Safe and conform: built to the safety standards, with the complete installation of machine and robot CE-conform.
From existing machine to automated cell

We look at your machine, your parts and your batches, and check which signals, door and clamping are already there.

We connect the machine signals to the robot with the standard RoboJob interface, so robot and machine can talk to each other.

If your machine has a manual door, we automate it according to the safety standards and link it to the machine interface.

The chuck, collet or vice must open and close automatically. We advise on the right solution for your parts.

We install the robot and the retrofit, and start the cell up in your shop. For a Turn-Assist or Mill-Assist this takes 4 to 5 days.

Your operators learn to set up new jobs themselves. Afterwards our service team keeps supporting you.
What does your machine need?
To be loaded by a robot, a CNC machine needs three things. Many machines already have one or more of them. What is missing, we can add.
The machine signals that let the robot and the CNC control work together. Every machine has the necessary signals; we make them available to the robot.
The robot must be able to open and close the machine door. A manual door can be automated.
The chuck, collet or vice must be actuated automatically, so the robot can clamp and unclamp the part.
You choose who prepares the machine: your machine supplier or RoboJob. RoboJob can handle the complete retrofit for you, so you deal with one partner.
We retrofit and automate CNC lathes, vertical and horizontal machining centres, 5-axis machines and multitasking machines.
Which RoboJob system fits your machine?
The right system depends on your parts, your batch sizes and how long the machine must run unmanned. Answer a few questions and we suggest a match.
Compact systems for one machine. Installed in 4 to 5 days.
For more parts and longer unmanned runs. Pallet-Load installs in 4 to 5 days; a Tower or Wall takes at least two weeks. One Tower or Wall can serve machines of different brands.
Explore our automation systems

Air-Assist for 5-axis milling machines
No rotary unions on your 5-axis table? With Air-Assist the robot docks an air coupling on the machine table and takes it along after loading. Available with Mill-Assist and Pallet-Load.
Our retrofit packages
The standard RoboJob machine interface, based on our experience with more than 2,000 automated machines.
An automatic door according to the safety standards, including the connection to the machine interface.
For 5-axis milling machines without rotary unions, in combination with Mill-Assist or Pallet-Load.
- Analysis
- Preparation of the machine (retrofit)
- Standard automation with options
- Installation and start-up
- Operator training
- Service and support
What does automating an existing machine deliver?
You add spindle hours to a machine you already paid for, instead of investing in a new machine, floor space and operators. Calculate what automation delivers for your shop.
What changes in your shop

“Our machine had no automatic door, and of course no robot interface. RoboJob arranged everything in less than a week: the door was automated, the machine signals were taken off, and by the end of the week our first Turn-Assist Essential was running.”
Fabrice Monier, commercial manager, EODA (France)
Your existing machine keeps doing what it does well. The robot takes over the loading and unloading, so your operators can focus on setting up new jobs, programming and quality.
Existing machines automated in practice
EODA’s Mazak QTC 200 MY had no automatic door and no robot interface. RoboJob automated the door, connected the machine signals and started up a Turn-Assist Essential in less than a week.
The automatic door and robot interface were retrofitted on an existing Hurco VMX30i. A Mill-Assist Essential has been loading it since 2019.
A DMG Mori CTX 310 V3 and a FANUC Robodrill received automatic doors and robot interfaces. Each was automated in a few days.
More customer stories
More shops that automated the machines they already had.
More customer stories
More shops that automated the machines they already had.
Automating existing CNC machines: frequently asked questions
Can an older CNC machine be automated?
In most cases, yes. Every machine has the necessary signals. If the robot interface, automatic door or automatic clamping is missing, it can be retrofitted.
What does a CNC machine need for robot loading?
A robot interface, an automatic door and automatically actuated clamping such as a chuck, collet or vice.
Who prepares my machine for automation?
You choose: your machine supplier or RoboJob. RoboJob can handle the complete retrofit, so you work with one partner from analysis to start-up.
How long does it take to automate an existing machine?
A Turn-Assist, Mill-Assist, Coby or Pallet-Load is installed in 4 to 5 days. A Tower or Wall takes at least two weeks. EODA had its retrofitted Mazak running with a robot in less than a week.
Is a retrofitted machine safe?
Yes. Doors and interfaces are built to the safety standards, and the complete installation of machine and robot is CE-conform.
Can you automate a 5-axis milling machine without rotary unions?
Yes, with Air-Assist. The robot docks an air coupling on the machine table and takes it along after loading. Air-Assist works with Mill-Assist and Pallet-Load.
Which brands can you automate?
RoboJob automates CNC machines of every major brand. One Tower or Wall can even serve machines of different brands.

Discover what your machine can do
Tell us which machine you have. We check what it needs and which automation fits.
Let's meet
Want to automate the machines you already have?
Get in touch and explore the opportunities for your business.


Jan Van De Wouwer
Sales Manager

Austin Davis
Area Sales Manager




















