Home / Multitasking machine automation
Multitasking machine automation: keep your mill-turn centre running

Multitasking machine automation: keep your mill-turn centre running

A robot loads blanks into your multitasking machine and takes out finished parts, so complex turned and milled parts come off the machine around the clock.

What is multitasking machine automation?

Multitasking machine automation means a robot loads and unloads a mill-turn machine, such as a Mazak Integrex, an Okuma Multus or a DMG MORI NTX. The machine turns and mills the part complete in one set-up; the robot makes sure the next blank is always ready.

Multitasking machines replace several conventional machines, so they are expensive and usually the bottleneck in the shop. Their cycle times are long because the part comes off finished. That combination makes them ideal to run unattended.

Why automate a multitasking machine?
  • Complete parts in one clamping: the robot only loads once per part, even for complex geometries.
  • Long cycles: one load of blanks keeps the machine busy for hours.
  • The bottleneck runs longer: extra hours on the multitasking machine raise the output of the whole shop.
  • Large and small batches: PTM Mechatronics runs batches from 100 to 8,000 parts on one automated Integrex.

Which multitasking machines can be automated?

Most multitasking and mill-turn machines can be automated, also older ones. The machine needs a robot interface, an automatic door and a chuck that clamps automatically.

Mazak Integrex

RoboJob automates many Integrex machines: PTM Mechatronics (Integrex j-200S with a Tower), Kammerer MedTec (five Integrex machines with Turn-Assist), Hetschel and Fecken-Kirfel.

Okuma Multus and DMG MORI NTX

Strautmann Hydraulik feeds an Okuma Multus U 3000 and a DMG MORI NTX 2000 with Pallet-Load. Nossin Fijnmechanische Industrie runs an Okuma Multus U3000 with a Tower.

Lathes and machining centres too?

For conventional lathes and turning centres, see CNC lathe automation. For milling machines and 5-axis machining centres, see CNC milling automation.

Which RoboJob system fits your multitasking machine?

  • Tower: the most storage for long unattended runs and many different jobs. PTM Mechatronics runs its Integrex 24/7 with a Tower.
  • Turn-Assist: a compact cell for one multitasking machine with fast job changes, as at Kammerer MedTec and Hetschel.
  • Pallet-Load: for larger batches of heavier blanks, straight from a positioning pallet.
  • Wall: one central storage for several multitasking machines, each with its own robot.

Blank weights range from 6 to 42 kg on Turn-Assist and up to 113 kg on Tower, Wall and Pallet-Load, depending on the robot.

Tower or Turn-Assist?

A Turn-Assist is enough when the machine runs a limited number of jobs per week. Choose a Tower when the multitasking machine must run for days, switch between many jobs, or share one system with a second machine.

Systems for multitasking machines

  • Tower

    Tower

    Tower: die ultimative Automatisierung für Dreh- und Fräsmaschinen - wechselt Vorrichtungen, Spannbacken, Spannzangen und Werkstücke schneller, als Sie "Automatisierungsgenie" sagen können.

  • Turn-Assist

    Turn-Assist

    Ein intelligentes, flexibles System, das das Be- und Entladen von CNC-Drehmaschinen rationalisiert.

  • Pallet-Load

    Pallet-Load

    Eine zuverlässige Automatisierungslösung für das effiziente Be- und Entladen von CNC-Maschinen von und auf eine Palette.

  • Wall

    Wall

    Ein revolutionäres modulares Automatisierungssystem, das die Beladung von CNC-Maschinen bei maximaler Raumeffizienz vereinfacht.

From two production teams to one

From two production teams to one

PTM Mechatronics runs its Mazak Integrex 24/7 with a Tower, with one team instead of two and more output.

Complete machining, unattended

Main and sub-spindle

The robot loads the main spindle; the machine transfers the part to the sub-spindle for the back side. The robot then removes the finished part, so no separate flip-over step is needed.

Remote support

RoboJob service technicians can connect remotely to the cell, so downtime stays short. PTM Mechatronics names this as a major advantage.

Batches from 100 to 8,000 parts

One automated multitasking machine can handle both large batches and high-mix, low-volume work, as PTM shows on its Integrex j-200S.

What does multitasking automation deliver?

A multitasking machine often replaces two or three conventional machines. Every unattended hour therefore adds more finished parts than an extra hour on a single lathe or mill.

Strautmann Hydraulik raised capacity utilisation in its automated area from 68% to 85%, with Pallet-Load on its Multus and NTX machines among the automated cells.

What changes with an automated multitasking machine

What changes with an automated multitasking machine

Automating your multitasking machine changes how many complete parts leave the shop each day.

The bottleneck keeps moving. The machine that limits your output runs through breaks, nights and weekends.

Fewer teams needed. PTM Mechatronics went from two production teams to one, with more output.

Complex parts unattended. Turning and milling happen in one clamping, so nobody needs to re-clamp the part between operations.

Flexible batches. Large series and small jobs run on the same automated machine.

Short downtime. Remote service lets RoboJob technicians see what is happening and get production running again quickly.

Multitasking automation in practice

PTM Mechatronics, Germany: Integrex j-200S running 24/7

PTM Mechatronics automated its Mazak Integrex j-200S with a Tower in 2022. The machine runs 24/7 for batches from 100 to 8,000 parts, and the company went from two production teams to one, with more output.

Strautmann Hydraulik, Germany: Pallet-Load on Multus and NTX

Strautmann Hydraulik uses Pallet-Load to automate an Okuma Multus U 3000 and a DMG MORI NTX 2000, so both multitasking machines keep producing outside staffed hours.

Kammerer MedTec, Germany: five automated Integrex machines

Kammerer MedTec runs Turn-Assist cells on five Mazak Integrex multitasking machines and produces medical components 24 hours a day, 6 days a week.

More customer stories

Discover how other machine shops automated their mill-turn and multitasking machines.

More customer stories

Discover how other machine shops automated their mill-turn and multitasking machines.

Multitasking machine automation: frequently asked questions

Can a robot load a multitasking machine?

Yes. A robot loads blanks into the main spindle of a multitasking or mill-turn machine and removes the finished part. RoboJob automates Mazak Integrex, Okuma Multus, DMG MORI NTX and other multitasking machines.

Which RoboJob system is best for a multitasking machine?

A Tower suits long unattended runs and many jobs. A Turn-Assist is a compact choice for one machine. Pallet-Load feeds larger batches from a positioning pallet.

What about the sub-spindle?

The machine transfers the part to the sub-spindle itself. The robot loads the main spindle and removes the finished part, so the part comes out complete.

Can I automate an older multitasking machine?

Yes, if the machine can get a robot interface, an automatic door and an automatically clamping chuck. Your machine supplier or RoboJob adds whatever is missing.

Is it worth it for small batches?

Yes. PTM Mechatronics runs batches from 100 to 8,000 parts on one automated Integrex, and switching jobs takes minutes on the touchscreen.

How long does installation take?

A Turn-Assist or Pallet-Load is installed in 4 to 5 days. A Tower takes at least 2 weeks, depending on the machine and the modules.

Ready to automate your multitasking machine?

Ready to automate your multitasking machine?

Tell us which multitasking machine you run and which parts you make. We will propose the cell that keeps it running unattended.

Let's meet

Want to know how to automate your multitasking machine?

Get in touch and explore the opportunities for your business.

Jan Van De Wouwer Jan Van De Wouwer

Jan Van De Wouwer

Sales Manager
Austin Davis Austin Davis

Austin Davis

Area Sales Manager
Nathan Miliante Nathan Miliante

Nathan Miliante

Area Sales Manager